Epoxy & Structural

Global Adhesives

EPOXY & STRUCTURAL

2-PART EPOXIES AND EQUIPMENT

We offer three varieties of epoxy to meet your requirements.  The GEP-105 is a flexible fast curing clear 2-Part Epoxy and the GEP-110 is a general purpose.  The GEP-125 is a clear slow cure 2-Part Epoxy.  They are all 1 to 1 ratio products

GA Cat. # Description Color Size
GEP-105-50C Fast Cure 5 Minute Pot Life Flexible Clear Clear 50 ml
GEP-105-50B Fast Cure 5 Minute Pot Life Flexible Black Black 50 ml
GEP-105-2PKB Fast Cure 5 Minute Pot Life Flexible Black Black 16 oz. Kit
GEP-105-50C Fast Cure 5 Minute Pot Life General Purpose Clear Clear 50 ml
GEP-110-50B Fast Cure 5 Minute Pot Life General Purpose Black Black 50 ml
GEP-110-2PKC Fast Cure 5 Minute Pot Life General Purpose Clear Clear 16 oz. Kit
GEP-110-2PKB Fast Cure 5 Minute Pot Life General Purpose Black Black 16 oz. Kit
GEP-125-50C Slow Cure 45 Minute Pot Life General Purpose Clear Clear 50 ml
GEP-125-50B Slow Cure 45 Minute Pot Life General Purpose Black Black 50 ml
GEP-125-2PKC Slow Cure 45 Minute Pot Life General Purpose Clear Clear 16 oz. Kit
GEP-125-2PKB Slow Cure 45 Minute Pot Life General Purpose Black Black 16 oz. Kit
HNDPL-11 1 to 1 Hand Plunger Not Applicable 2 Pack
GUN-50 Mix-Pac Manual Gun Not Applicable 50 ml
MIXER-2 Static Mixer for 50 ml Not Applicable 2 Inch
MIXER-3 Round Static Mixer for 50 ml Not Applicable 3 Inch
MIXER QUAD Quad 16 Element Static Mixer for 50 ml Not Applicable 3 1/2 Inch
7500-1A-B Black Rechargeable Cartridge Dispensing Gun Black 50 ml Gun
7500-1A-W White Rechargeable Cartridge Dispensing Gun White 50 ml Gun
1010-011 Replacement Battery NI-MH 7.2V Not Applicable 1 Pack

 

MAGNET ADHESIVE & ACTIVATOR

This severe environment acrylic adhesive is excellent for bonding the magnets to the bases.  It is a 2-Part, the GAP-203 activator should be applied to both surfaces and allowed to dry for 1 minute.  Then apply the adhesive to one of the surfaces and press together.  Allow to cure for 30 minutes.

GA Cat. # Description Size
GMA-257 Acrylic Magnet Adhesive 50 ml
GAP-203 Acrylic Adhesive Activator 1oz.

 

VOICE COIL LAMINATING CEMENT

This material is designed for coating voice coil windings.  It will keep the voice coil windings from fraying at temperatures over 500F.  It is a two-stage resin.  Let air dry and then oven cure for 30-40 minutes at 300-350 degrees.

GA Cat. # Description Size
CLA-16 Hi-Temp Coil Winding Cement 16oz.